- Eye drops with the COMOD® system with 0.1% Sodium Hyaluronate
- Compatible with all types of contact lenses, therefore, there is no need to wait after applying the drops
- No preservatives, buffered with citrate buffer and therefore completely free of phosphates
- Great performance with a low therapeutic cost
To apply HYLO PARIN® properly, follow these steps:
Step 1: Before first use, make sure the seal on the box is intact. Remove the cap from the container by twisting the cap while holding the container with one hand.
For the first application, hold the container vertically with the tip down and press the base until the first drop comes out of the nozzle. Now the container is ready for use.
Step 2: Hold the container with the dropper facing down, with your thumb pressing on the shoulder of the container and the other fingers on the base.
Step 3: Support the hand holding the container on your free hand, as shown in the instructions.
Step 4: Tilt your head back slightly, gently pull down the lower eyelid and press the base of the container firmly and quickly. This will activate the mechanism to release a droplet.
Thanks to the special valve technology of the COMOD® system, the size and speed of the drop will be consistent, regardless of the pressure applied. Close your eyes slowly so that the liquid is evenly distributed over the ocular surface.
